Product Description: ANTISTATIC SILICONE RUBBER
● Stable physical and mechanical properties
● Good processability
Main Applications:
●They are specially designed for molded silicone rubber products with requirements for control of static.
Typical Data：
|
Properties |
Product Data |
|||||||
|
NE-1420 |
NE-1430 |
NE-1440 |
NE-1450 |
NE-1460 |
NE-1470 |
NE-1480 |
||
|
Appearance |
Milk-white, no extraneous matter. |
Visual Inspection |
||||||
|
Density, g/cm3 |
1.04～ 1.10 |
1.07～ 1.12 |
1.10～1.16 |
1.13～1.18 |
1.15～1.20 |
1.19～1.24 |
1.20～ 1.25 |
|
|
Hardness, Shore A |
25±2 |
30±2 |
40±2 |
50±2 |
60±2 |
70±2 |
75-80 |
ASTM D2240 |
|
Tensile Strength, MPa, ≥ |
4.5 |
6.0 |
6.0 |
7.0 |
7.0 |
6.5 |
6.5 |
ASTM D412 |
|
Elongation at Break, %, ≥ |
600 |
500 |
450 |
350 |
300 |
200 |
180 |
|
|
Tension Set, %, ≤ |
14 |
12 |
12 |
12 |
12 |
12 |
12 |
|
|
Tear Strength, Die C, kN/m, ≥ |
12 |
13 |
15 |
20 |
20 |
16 |
19 |
ASTM D624 |
|
Volume resistivity, Ω· cm, ≤ |
1×1012 |
IEC 60093 |
||||||
●
Physical data in the above table is for reference only.
● Vulcanization condition: 175℃*5Min.
● Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Product Description: ANTISTATIC SILICONE RUBBER
Characteristics:
● Good antistatic effect
● Stable physical and mechanical properties
● Good processability
Main Applications:
●Specially designed for molded silicone rubber products with requirements for control of static. Protective sheath and rubber rollers suitable for antistatic electronic products.
Typical Data：
|
Properties |
Product Data |
||||
|
NE-4120-40 |
NE-4120-50 |
NE-4120-60 |
NE-4120-70 |
||
|
Appearance |
Transparent, no extraneous matter. |
Visual Inspection |
|||
|
Density, g/cm3 |
1.09～1.15 |
1.12～1.18 |
1.14～1.20 |
1.17～1.23 |
|
|
Hardness, Shore A |
40±2 |
50±2 |
60±2 |
70±2 |
ASTM D2240 |
|
Tensile Strength, MPa, ≥ |
8.0 |
8.5 |
8.5 |
8.5 |
ASTM D412 |
|
Elongation at Break, %, ≥ |
500 |
400 |
400 |
300 |
|
|
Tension Set, %, ≤ |
9 |
8 |
8 |
8 |
|
|
Tear Strength, Die C, kN/m, ≥ |
20 |
25 |
25 |
25 |
ASTM D624 |
|
Volume resistivity, Ω· cm, ≤ |
1×1012 |
IEC 60093 |
|||
● Physical data in the above table is for reference only.
● Vulcanization condition: 175℃*5Min.
● Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Related material download:
ROHS and Other Restricted Substances Test for Silicone Rubber
Substances of Very High Concern Test(SVHC) for Silicone Rubber
MSDS-Antistatic Silicone Rubbe
Antistatic Silicone Rubber NE-14 Series TDS
Antistatic Silicone Rubber NE-4120 Series TDS
