Characteristics:
● Superior processability
Main Applications:
● Swimming caps, swimming goggles, cushions and pen caps with good hand feeling
Typical Data：
Properties
Product Data
Test Method
NE-10
NE-20
NE-7120
NE-9110
NE-9120
NE-9320
Appearance
Milk-white, translucent
Milk-white, yellowish
Transparent
Visual
Inspection
No obvious extraneous matter
Density, g/cm3
1.00～1.06
1.04～1.09
1.00～1.06
1.04～1.09
1.04～1.09
ASTM D792
Hardness, Shore A
12±2
20±2
11±2
20±2
ASTM D2240
Tensile Strength, MPa, ≥
1.5
3.5
3.0
1.5
4.0
4.5
ASTM D412
Elongation at Break, %, ≥
760
750
700
780
800
Tension Set, %, ≤
8
6
8
10
8
Tear Strength, Die C, kN/m, ≥
5
10
5
12
13
ASTM D624
● Physical data in the above table is for reference only.
● Vulcanization condition: 175℃* 5Min.
● Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Related material download:
ROHS and Other Restricted Substances Test for Silicone Rubber
Substances of Very High Concern Test(SVHC) for Silicone Rubber
MSDS-Ultra-low-hardness Silicone Rubber
FDA Test for Silicone RubberUltra-low-hardness Silicone Rubber
