Product Description: HIGH-TRANSPARENCY FUMED SILICONE RUBBER
● Compliance with FDA and LFGB
● High grade of transparency and excellent physical properties
● High tear strength (the tear strength of high-hardness silicone can be reached to 40KN/M)
● Yellowing resistance and good processability
Main Applications:
● Food contact molded silicone rubber products with extremely high requirement for transparency
Typical Data:
|
Properties |
Product Data |
|||||||||
|
NE-9430 |
NE-9440 |
NE-9450 |
NE-9460 |
NE-9470 |
NE-9480 |
|||||
|
Appearance |
Transparent, no extraneous matter. |
Visual Inspection |
||||||||
|
Density, g/cm3 |
1.06～1.10 |
1.09～1.15 |
1.12～1.18 |
1.14～1.20 |
1.17～1.23 |
1.18～1.25 |
||||
|
Curing
|
Hardness, Shore A |
32±2 |
40±2 |
50±2 |
60±2 |
70±2 |
80±2 |
ASTM D2240 |
||
|
Tensile Strength, MPa, ≥ |
8.0 |
9.0 |
8.0 |
|||||||
|
Elongation at Break, %, ≥ |
700 |
600 |
500 |
400 |
300 |
200 |
||||
|
Tension Set, %, ≤ |
8 |
|||||||||
|
Tear Strength, Die C, kN/m, ≥ |
18 |
35 |
40 |
20 |
ASTM D624 |
|||||
|
Post- curing
|
Hardness, Shore A |
33±2 |
45±2 |
55±2 |
65±2 |
75±2 |
83±2 |
ASTM D2240 |
||
|
Tensile Strength, MPa, ≥ |
7.0 |
8.0 |
8.5 |
8.0 |
7.5 |
ASTM D412 |
||||
|
Elongation at Break, %, ≥ |
650 |
500 |
450 |
350 |
250 |
150 |
||||
|
Tear Strength, Die C, kN/m, ≥ |
12 |
20 |
25 |
19 |
ASTM D624 |
|||||
|
Rebound Resilience, %, ≥ |
50 |
45 |
40 |
35 |
/ |
|||||
|
Volume Resistivity, Ω ▪cm, ≥ |
1×1015 |
|||||||||
|
Dielectric Strength, kV/mm, ≥ |
20 |
|||||||||
|
First-order linear shrinkage, % |
3.2～3.7 |
3.0～3.6 |
2.9～3.4 |
2.8～3.4 |
2.6～3.2 |
2.4～3.0 |
/ |
|||
● Physical data in the above table is for reference only.
● Vulcanization condition: 175℃*5Min. ●Post-curing condition:200℃* 4h
● Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Related material download:
ROHS and Other Restricted Substances Test for Silicone Rubber
Substances of Very High Concern Test(SVHC) for Silicone Rubber
MSDS-High-transparency Fumed Silicone Rubber
FDA Test for Fumed Silicone RubberLFGB Test for Fumed Silicone Rubber
High-transparency Fumed Silicone Rubber NE-94 Series TDS
High-transparency Fumed Silicone Rubber
