Product Description: ECONOMIC FUMED SILICONE RUBBER FOR EXTRUSION
● Compliance with FDA
● Good transparency and mechanical properties
● Good yellowing resistance and stable processability
Main Applications:
●They are applicable to manufacturing of various silicone tubes, sealing joint strips, electric wires and cables through extrusion process
Typical Data：
|
Properties |
Product Data |
||||||
|
NE-9640 |
NE-9650 |
NE-9660 |
NE-9670 |
NE-9680 |
|||
|
Appearance |
Transparent, no extraneous matter. |
Visual Inspection |
|||||
|
Density, g/cm3 |
1.09～1.15 |
1.12～1.18 |
1.14～1.20 |
1.17～1.23 |
1.18～1.25 |
||
|
Curing
|
Hardness, Shore A |
40±2 |
50±2 |
60±2 |
70±2 |
80±2 |
ASTM D2240 |
|
Tensile Strength, MPa, ≥ |
8.0 |
8.5 |
8.0 |
||||
|
Elongation at Break, %, ≥ |
500 |
400 |
300 |
200 |
|||
|
Tension Set, %, ≤ |
10 |
||||||
|
Tear Strength, Die C, kN/m, ≥ |
20 |
25 |
20 |
ASTM D624 |
|||
|
Post- curing
|
Hardness, Shore A |
45±2 |
57±2 |
68±2 |
76±2 |
85±2 |
ASTM D2240 |
|
Tensile Strength, MPa, ≥ |
7.5 |
8.0 |
7.0 |
ASTM D412 |
|||
|
Elongation at Break, %, ≥ |
400 |
350 |
260 |
150 |
|||
|
Tear Strength, Die C, kN/m, ≥ |
18 |
16 |
ASTM D624 |
||||
|
Compression Set, 180℃*22h, ≤ |
45 |
35 |
30 |
ASTM D395 |
|||
|
Rebound Resilience, %, ≥ |
50 |
45 |
40 |
/ |
|||
|
Volume Resistivity, Ω ▪cm, ≥ |
1×1015 |
||||||
|
Dielectric Strength, kV/mm, ≥ |
20 |
||||||
● Physical data in the
above table is for reference only.
● Vulcanization condition: 175℃* 5Min. ●Post-curing condition:200℃* 4h
● Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Related material download:
ROHS and Other Restricted Substances Test for Silicone Rubber
Substances of Very High Concern Test(SVHC) for Silicone Rubber
MSDS-Economic Fumed Silicone Rubber for Extrusion
LFGB Test for Fumed Silicone RubberFDA Test for Fumed Silicone Rubber
Economic Fumed Silicone Rubber for Extrusion NE-96 Series TDS
